Full Specifications
JOHN DEERE 4600 POWER
Engine (gross)
43hp / 32.1kW
Engine (net)
41hp / 30.6kW
PTO (claimed)
36hp / 26.8kW (gear) 34.5hp / 25.7kW (hydro)
ENGINE DETAIL
Description
Yanmar 4TNE84 diesel 4-cylinder liquid-cooled
Displacement
121ci / 2.0L
Bore/Stroke
3.307x3.543inches / 84x 90mm
Power (gross)
43hp / 32.1kW
Fuel system
direct injection
Air cleaner
dry
Pre-heating
air heater
Compression
18:1
Rated RPM
2600
Torque
98lb-ft / 132.9Nm
Torque RPM
1700
Starter volts
12
Starter power
2.7hp / 2.0kW
Coolant capacity
7.6qts / 7.2L
ENGINE OIL
Oil capacity
5.1qts / 4.8L
JOHN DEERE 4600 ENGINE
Description
Yanmar 2.0L 4-cyl diesel
TRANSMISSIONS OVERVIEW
Description
9-speed unsynchronized gear hydrostatic 12-speed partially synhcronized power shuttle 24-speed partially synhcronized power shuttle
TRANSMISSION 1
Transmission
Collar Shift
Type
unsynchronized gear
Gears
9 forward and 3 reverse
Clutch
dry
Oil capacity
27.2qts / 25.7L
Description
Three speeds (1-3), plus reverse, in three ranges (A-C). Tractor must be stopped, and clutch used, to shift speeds or ranges
SPEEDS 1
Description
With 13.6-28 rear tries
TRANSMISSION 2
Type
hydrostatic
Gears
infinite (three-range) forward and reverse
Oil capacity
35.2qts / 33.3L
Description
Hydrostatic transmission operated with two foot pedals. Push-button cruise control on dash. Tractor must be stopped to shift ranges
SPEEDS 2
Description
With 13.6-28 rear tries
TRANSMISSION 3
Transmission
Power Reverser
Type
partially synhcronized power shuttle
Gears
12 forward and reverse
Clutch
wet disc, two clutch packs with three 5-inch discs each
Oil capacity
27.2qts / 25.7L
Description
Four speeds (1-4) in three ranges (A-C) with left-hand reverser on dash. Power shuttle allows direction changes without using the clutch. Speeds are synchronized and may be shifting on the move, using the clutch. Tractor must be stopped to shift ranges
SPEEDS 3
Description
With 13.6-28 rear tries
TRANSMISSION 4
Transmission
Power Reverser Creeper
Type
partially synhcronized power shuttle
Gears
24 forward and reverse
Clutch
wet disc, two clutch packs with three 5-inch discs each
Oil capacity
27.2qts / 25.7L
Description
Add creeper range to the Power Reverser, engaged by separate lever. Tractor must be stopped, and clutch used, to shift in or out of creeper range
SPEEDS 4
Description
With 13.6-28 rear tries
MECHANICAL
Chassis
4x2 2WD/4x4 MFWD 4WD
Differential lock
mechanical
Steering
power
Brakes
wet disc
Transmissions
9-speed unsynchronized gear hydrostatic 12-speed partially synhcronized power shuttle 24-speed partially synhcronized power shuttle
CAPACITY
Fuel
12.5gal / 47.3L
Hydraulic system
6.8gal / 25.7L (gear) 8.8gal / 33.3L (hydro)
Front axle
8.4qts / 7.9L
HYDRAULICS
Type
open center
Capacity
6.8gal / 25.7L (gear) 8.8gal / 33.3L (hydro)
Pressure
2500psi / 172.4bar
Valves
3 optional
Pump flow
9.9gpm / 37.5lpm
Total flow
14.7gpm / 55.6lpm
Steering flow
4.8gpm / 18.2lpm
TRACTOR HITCH
Rear Type
I
Rear lift (at 24
2,500lbs / 1134kg
POWER TAKE-OFF (PTO)
Rear PTO
independent
Rear RPM
540
Mid PTO
independent
Mid RPM
2100
DIMENSIONS
Length
135inches / 342cm
JOHN DEERE 4600 WEIGHT
3,450lbs / 1564kg
Max Drawbar
570lbs / 258kg
Max front axle
992lbs / 449kg
Max rear axle
1,984lbs / 899kg
JOHN DEERE 4600 HEIGHT
Hood
49.2inches / 124cm (2WD) 51inches / 129cm (4WD)
ROPS
88.4inches / 224cm (2WD fixed) 91.6inches / 232cm (4WD fixed) 94.4inches / 239cm (2WD folding) 97.6inches / 247cm (4WD folding)
DIMENSIONS & TIRES
Weight
3,450lbs / 1564kg
ATTACHMENT OVERVIEW
Description
72
72
Type
mid-mount John Deere 3-blade
Cutting width
72inches / 182cm
Overall width
85inches / 215cm
BLADE
Type
front-mount John Deere
Width
84inches / 213cm
Angle
30°
Weight
725lbs / 328kg
Lift type
hydraulic
Angle type
hydraulic
JOHN DEERE 460 LOADER
Height (to pin)
111.9inches / 284cm
Clearance, dumped bucket
88.8inches / 225cm
Dump reach
26.9inches / 68cm
Dump angle
45°
Reach at ground
61.8inches / 156cm
Rollback angle
30°
Breakout force (at 800mm)
3,863lbs / 1752kg
Lift to full height (at 800mm)
2,325lbs / 1054kg
Raise time to height
4.8 s
Bucket dump time
2.2 s
Lowering time
3.3 s
Rollback time
2.5 s
JOHN DEERE 48 BACKHOE
Backhoe type
John Deere 48 Backhoe
Weight
1517lbs / 688kg
Transport height
81inches / 205cm
Bucket width
12inches / 30cm 18inches / 45cm 24inches / 60cm 36inches / 91cm
Digging depth
102inches / 259cm
Reach from pivot
133inches / 337cm
Loading height
82inches / 208cm
Bucket Rotation
180
Swing Arc
180
Bucket force
3730lbs / 1691kg
Dipperstick force
2435lbs / 1104kg
4600 SERIAL NUMBERS
Location
Serial number plate on front-right tractor frame, above front wheel
1998
160000
1999
260001
2000
360001
2001
460001
ELECTRICAL
Ground
negative
Charging system
alternator
Charging amps
40
Battery CCA
650
Battery volts
12
The 4600 model tractor is part of John Deere's 9R line of tractors. The 4600 is a kind of Compact Utility Tractors and which is mostly used for Agriculture Tractors applications. The 4600 tractor has a engine. This arrangement is more practical in the actual world.