John Deere 4040 Tractor (1982)

Manufacturer:John Deere

Price:36,549(USD)

Series:Iron Horses Series

Model:4040

Equipment Type: Row-Crop Tractors

Factory:Waterloo, Iowa, USA

Full Specifications

ENGINE DETAIL

Description: John Deere diesel 6-cylinder liquid-cooled
Displacement: 404ci / 6.6L
Bore/Stroke: 4.25x4.75inches / 108x 121mm
Pre-heating: ether injection
Compression: 16.7:1
Rated RPM: 2200
Idle RPM: 800-2400
Operating RPM: 1500-2200
Firing order: 1-5-3-6-2-4
Starter volts: 12
Oil capacity: 17qts / 16.1L
Coolant capacity: 24qts / 22.7L

JOHN DEERE 4040 ENGINE

Description: John Deere 6.6L 6-cyl diesel

TRANSMISSIONS OVERVIEW

Description: 16-speed partial power shift 8-speed partially synchronized 8-speed full power shift 13-speed creeper

TRANSMISSION 1

Transmission: John Deere Quad-Range
Type: partial power shift
Gears: 16 forward and 6 reverse
Oil capacity: 62qts / 58.7L
Description: Four gears (1-4) in four ranges (A-D). Power shift between pairs 1-2 and 3-4 in each range, with synchronized shift between 2-3. Two reverses in ranges A-C. Tractor must be stopped, and clutch used, to shift ranges. Power shift is provided hy a hydraulically-controlled planetary that provides an under-drive to each gear

SPEEDS 1

Description: With 18.4-34 rear tires

TRANSMISSION 2

Transmission: John Deere Syncro-Range
Type: partially synchronized
Gears: 8 forward and 2 reverse
Oil capacity: 62qts / 58.7L
Description: Four shift stations with two forward gears each. Reverse gear in stations one and two. Shifts between gears within a station are synchronized (clutch must be used). Tractor must be stopped, and clutch used, to select shift stations

TRANSMISSION 3

Transmission: John Deere Powershift
Type: full power shift
Gears: 8 forward and 4 reverse
Oil capacity: 54qts / 51.1L
Description: Clutchless shift-on-the-move power shift between all eight forward and four reverse gears. Inching pedal provided for hooking up implements and other precision work

TRANSMISSION 4

Transmission: John Deere Synchro-Range Creeper
Type: creeper
Gears: 13 forward and 5 reverse
Oil capacity: 62qts / 58.7L
Description: Adds creeper to gears 1-5 of the Syncro-Range transmission. Creeper engaged by clutching and moving creeper control lever

JOHN DEERE 4040 TRANSMISSIONS

Description: 16-speed partial power shift 8-speed partially synchronized 8-speed full power shift 13-speed creeper

MECHANICAL

Drive: 4x2 2WD/4x4 HFWD 4WD
Differential lock: pedal-actuated hydraulic
Description: Power steering Differential hydraulic wet disc brakes Sound-Gard cab standard

CAPACITY

Fuel: 37gal / 140.0L
Hydraulic system: 11gal / 41.6L

HYDRAULICS

Type: closed center
Capacity: 11gal / 41.6L
Valve: 1 or 2
Pump flow: 23gpm / 87.1lpm

TRACTOR HITCH

Rear Type: II/I
Rear lift: 4316lbs / 1957kg 5395lbsOptOptional / 2447kg

POWER TAKE-OFF (PTO)

Rear PTM: independent
Rear RPM: 540/1000 (1.375)

JOHN DEERE 4040 TIRES

Ag front: 11L-15
Ag rear: 23.1-30 / 16.9-34 / 18.4-34 / 20.8-34 / 15.5-38 / 16.9-38 / 18.4R38

DIMENSIONS & TIRES

Wheelbase: 104inches / 264cm
Weight: 9630 to 10490 pounds
Front tire: 9.5L-15
Rear tire: 18.4-38

4040 SERIAL NUMBERS

1979: 3199
1982: 11727

4040 SERIAL LOCATION

Description: Serial number plate on the rear of the 4040, above the PTO shaft

ELECTRICAL

Ground: negative
Charging system: alternator
Batteries: 2
Battery CCA: 850
Battery volts: 6

About John Deere Tractor

The 4040 model tractor belongs to the Iron Horses Series of tractors from John Deere. The 4040 is a Row-Crop Tractors type, which is used often in Agriculture Tractors. The 4040 tractor is powered by a engine. This configuration gives better real-world usability.