Ford 2110 Tractor (1987)

Manufacturer:Ford

Price:13,200(USD)

Series:Ten Compact Series

Model:2110

Equipment Type: Compact Utility Tractors

Factory:Japan

Full Specifications

NEBRASKA TRACTOR TEST 1509 2

Description: Diesel manual 2WD March 30 - April 13, 1984 Link: Nebraska Tractor Test 1509 file PTO performance Drawbar performance Gear 3-2 used for power test Gear 2-2 used for pull test
Power at rated engine speed: 34.79hp / 25.9kW
Fuel use: 2.4gal/hour / 9.1l/hour
Power at rated PTO speed: 34.91hp / 26.0kW
Max power: 28.84hp / 21.5kW
Max pull: 3,868lbs / 1754kg

NEBRASKA TRACTOR TEST 1510 2

Description: Diesel synchromesh 2WD March 30 - April 9, 1984 Link: Nebraska Tractor Test 1510 file PTO performance Drawbar performance Gear 3-2 used for power test Gear 2-3 used for pull test
Power at rated engine speed: 35.11hp / 26.2kW
Fuel use: 2.6gal/hour / 9.8l/hour
Power at rated PTO speed: 35.56hp / 26.5kW
Max power: 30.10hp / 22.4kW
Max pull: 3,728lbs / 1691kg

FORD 2110 POWER

Engine: 38hp / 28.3kW
PTO (claimed): 34.5hp / 25.7kW
Drawbar (tested): 30.10hp / 22.4kW
PTO (tested): 35.11hp / 26.2kW

ENGINE DETAIL

Description: Shibaura diesel 4-cylinder liquid-cooled
Displacement: 138.5ci / 2.3L
Bore/Stroke: 3.346x3.937inches / 85x 100mm
Power: 38hp / 28.3kW
Fuel use: 2.52gal/hour / 9.5l/hour
Air cleaner: dry
Pre-heating: glow plugs
Compression: 21:1
Rated RPM: 2500
Torque: 89.5lb-ft / 121.4Nm
Torque RPM: 2000
Starter volts: 12
Oil capacity: 8qts / 7.6L
Coolant capacity: 9.1qts / 8.6L

FORD 2110 ENGINE

Description: Shibaura 2.3L 4-cyl diesel
Fuel tank: 10.6gal / 40.1L

TRANSMISSIONS OVERVIEW

Description: 12-speed unsynchronized gear 12-speed partially synchronized

TRANSMISSION 1

Type: unsynchronized gear
Gears: 12 forward and 4 reverse
Clutch: 240mm dry disc
Oil capacity: 34.3qts / 32.5L
Description: Three gears, plus reverse, in four ranges

SPEEDS 1

Description: With 13.6-28 rear tires

TRANSMISSION 2

Type: partially synchronized
Gears: 12 forward and 4 reverse

MECHANICAL

Chassis: 4x2 2WD/4x4 MFWD 4WD
Final drives: spur gear
Differential lock: mechanical rear
Steering: power
Brakes: differential mechanical drum
Cab: Two-post fixed ROPS
Transmissions: 12-speed unsynchronized gear 12-speed partially synchronized

HYDRAULICS

Type: open center
Pressure: 2133psi / 147.1bar
Pump flow: 8.6gpm / 32.6lpm
Total flow: 12.1gpm / 45.8lpm
Steering flow: 3.5gpm / 13.2lpm

TRACTOR HITCH

Rear Type: I
Control: position and draft control
Rear lift (at 24: 2013lbs / 913kg

POWER TAKE-OFF (PTO)

Rear PTO: live
Rear RPM: 540 (1.375)
Engine RPM: 540@2392

FORD 2110 TIRES

2WD Standard tires (ag): Front: 6.00-16. Rear: 13.6-28
4WD Standard tires (ag): Front: 8.00-18. Rear: 13.6-28
Lawn/turf front: 25x8.50-14 (2WD)/27x8.50-15 (4WD)
Lawn/turf rear: 18.4x16.1

DIMENSIONS

2WD Wheelbase: 73.4inches / 186cm
4WD Wheelbase: 75.6inches / 192cm
Length: 131.1inches / 332cm
Width: 61.7inches / 156cm
Height (steering wheel): 63inches / 160cm
Height (exhaust): 79.9inches / 202cm
Ground clearance: 15.6inches / 39cm
2WD Front tread: 48 to 72inches / 121to 182cm
4WD Front tread: 46.8inches / 118cm
Rear tread: 48 to 72inches / 121to 182cm

FORD 2110 WEIGHT

2WD: 3635lbs / 1648kg
4WD: 3946lbs / 1789kg
Ballasted: 5110lbs / 2317kg

DIMENSIONS & TIRES

2WD Wheelbase: 73.4inches / 186cm
4WD Wheelbase: 75.6inches / 192cm
Weight: 3635 to 3946 pounds
Front tire: 6.00-16
2WD Rear tire: 13.6-28

ATTACHMENT OVERVIEW

Description: Snowblower Front-end loader Backhoe, Listed for the Ford 2110 were 59 and 72 inch rear finish mowers as well as 60 inch rear rotary cutters

60

Type: rear-mount Ford 715 two-stage with hydraulic lift
Clearing width: 60inches / 152cm

FORD 776A LOADER

Loader weight: 1035lbs / 469kg
Height (to pin): 124inches / 314cm
Clearance, dumped bucket: 102inches / 259cm
Dump reach: 26inches / 66cm
Dump angle: 40°
Reach at ground: 75inches / 190cm
Rollback angle: 6°
Breakout force (lift): 3750lbs / 1701kg
Lift to full height (at pin): 2500lbs / 1134kg
Bucket width: 48inches / 121cm 60inches / 152cm 72inches / 182cm

FORD 776B LOADER

Loader weight: 1260lbs / 571kg
Height (to pin): 124inches / 314cm
Clearance, dumped bucket: 102inches / 259cm
Dump reach: 26inches / 66cm
Dump angle: 40°
Reach at ground: 75.2inches / 191cm
Rollback angle: 6°
Breakout force (lift): 3750lbs / 1701kg
Lift to full height (at pin): 2500lbs / 1134kg
Bucket width: 48inches / 121cm 60inches / 152cm 72inches / 182cm

FORD 758A BACKHOE

Backhoe type: Ford 758A Backhoe
Bucket width: 8inches / 20cm 13inches / 33cm 16inches / 40cm
Digging depth: 96inches / 243cm
2-Foot flat digging depth: 94inches / 238cm
8-Foot flat digging depth: 56inches / 142cm
Reach from pivot: 140.4inches / 356cm
Loading height: 83.6inches / 212cm
Dipperstick force: 726lbs / 329kg

2110 SERIAL NUMBERS

Location: Serial number plate on the left side of the Ford 2110, near the clutch pedal
1983: UV00001
1984: UV00442
1985: UV02153
1986: UV03580
1987: UV04673

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 35
Charging volts: 12
Battery volts: 12
Battery AH: 100

About Ford Tractor

The 2110 model tractor is member of Ford's 9R line of tractors. The 2110 is a Compact Utility Tractors and is majorly used for Agriculture Tractors applications. The 2110 tractor is operated by a engine. This configuration is more practical in the real world.