John Deere 3046R Tractor

Manufacturer:John Deere

Price:31,622(USD)

Series:3R Series

Model:3046R

Equipment Type: Compact Utility Tractors

Factory:Augusta, Georgia, USA

Full Specifications

KEY SPECS

Engine power (gross): SAE J1995 rated power: 33.3 kW/44.7 hp/45.3 PS
Power take-off (PTO) power: Per SAE J1995: 25.3 kW/33.9 hp
Steering hydraulics: 23.5 L/min/6.2 gpm
Implement hydraulics: 34.3 L/min/9.1 gpm
Hitch type: Category 1
Lift capacity, 24-in. behind link arms: 995 kg/2194 lb
Standard transmission; forward/reverse: eHydro transmission
Cruise control: Standard
Approximate shipping weight (open-station; cab): Open operator station (OOS): 1391 kg/3066 lb/Cab: 1818 kg/4008 lb
Wheelbase: 1727 mm/68 in.

ENGINE

Manufacturer: Yanmar®
Engine model: 3TNV86CHT-MJTV
Engine power (gross): SAE J1995 rated power: 33.3 kW/44.7 hp/45.3 PS
Power take-off (PTO) power: Per SAE J1995: 25.3 kW/33.9 hp
Rated engine speed: 2600 rpm
Type: Diesel
Injection pump type: High pressure common rail direct injection
Aspiration: Turbocharged and intercooled
Emissions compliance: Final Tier 4
Cylinders/displacement: Three cylinders: 1.57 L/95.7 cu in.
Number of cylinders: Three
Cylinder liners: Cast-in-block
Bore and stroke: 86 x 90 mm/3.4 x 3.54 in.
Compression ratio: 19.1:1
Lubrication: Pressurized
Cooling system: Liquid
Air cleaner: Dual element
Engine torque at rated speed: 112.3 Nm/90 lb-ft
Fuel tank capacity: OOS: 37.4 L/10 U.S. gal./Cab only: 47.6 L/12.6 U.S. gal.

ELECTRICAL

Battery size: 500 CCA
Alternator (12-V): 75 amp
Starter size: 1.4 kW/1.9 hp

FUEL SYSTEM

Type: High pressure common rail direct injection

TRANSMISSION

Standard transmission; forward/reverse: eHydro transmission
Transmission gear ranges: Three-range, infinitely variable
Final drive: Spur gear
Brakes: Wet disk
Steering: Hydrostatic power steering
Axle capacity: Front/1450 kg/3197 lb/Rear/1850 kg/4079 lb/
Cruise control: Standard

HYDRAULICS

Type: Open center
Pump rated output: Steering/23.5 L/min/6.2 gpm/Implement/34.3 L/min/9.1 gpm/57.8 L/min/15.3 gpm
Pump type: Single gear
Maximum operating pressure: 172 bar/2495 psi
Draft control sensing: Position control
Remote control valves available: Up to six rear remotes

3-POINT HITCH

Type: Category 1
Lift capacity, 24-in. behind link arms: 995 kg/2194 lb

POWER TAKE-OFF (PTO)

Standard: Independent rear: 540 rpm
Optional: Mid: 2100 rpm
Control: Lever and switch
Clutch: Wet disk
Brake (for mid and rear PTO): Wet disk

FLUID CAPACITIES

Crankcase with filter: 5.7 L/6 qt
Transmission and hydraulic system: 26.5 L/7 U.S. gal.

FINAL DRIVE

Type: Spur gear

OPERATOR STATION

Rollover protective structure: Type/Foldable/
Platform - flat/straddle: One-piece semi flat

CAB

Compliance: Complies with OSHA, SAE, and CSA standards for rollover protection
Visibility: 360 degree (angle)
Doors: Two
Noise rating: 80 dBA
Seat equipment: Scissor-link

DIMENSIONS

Wheelbase: 1727 mm/68 in.
Front axle clearance: Minimum: 171 mm/6.7 in./Maximum: 299 mm/11.8 in.
Turning radius with brakes: 2.7 m/8.8 ft
Turning radius without brakes: 2.8 m/9.2 ft
Approximate shipping weight (open-station; cab): OOS: 1391 kg/3066 lb/Cab: 1818 kg/4008 lb

TIRES

Front: R1 Bar: 7-14/R3 Turf : 27x8.50-15/R3 Turf Special: 25/10.5LLx15/R4 Industrial: 25x8.5-14 or 27x8.5-15
Rear: R1 Bar: 11.2-24/R3 Turf: 41x14-20/R3 Turf Special: 41x18LL-16.1/R4 Industrial: 15-19.5 or 43x16-20
Front tread range: 1117 mm/44 in.
Rear tread spacing: 1031 mm/40.6 in.

About John Deere Tractor

The 3046R model tractor belongs to the 3R Series of tractors from John Deere. The 3046R is a type of Compact Utility Tractors and is majorly used for Agriculture Tractors applications. A 33.9 horsepower engine runs the 3046R tractor. This setting provides real-world usage.