John Deere 9630 Tractor (2011)
Manufacturer:John Deere
Price:N/A
Series:9030 Series
Model:9630
Equipment Type: Four-wheel Drive 4WD Tractors
Factory:Waterloo, Iowa, USA
Full Specifications
OCED TRACTOR TEST 1926
- Description
- Diesel 18-speed 4WD November 4 - 14, 2008 Link: OCED Tractor Test 1926 file Drawbar performance Gear 8 used for power test Gear 1 used for pull test
- Max power
- 427.14hp / 318.5kW
- Fuel use
- 27.8gal/hour / 105.2l/hour
- Max pull
- 53,666lbs / 24342kg
JOHN DEERE 9630 POWER
- Engine
- 530hp / 395.2kW
- Drawbar (tested)
- 427.14hp / 318.5kW
ENGINE DETAIL
- Description
- John Deere turbocharged aftercooled diesel 6-cylinder liquid-cooled
- Displacement
- 826.7ci / 13.5L
- Bore/Stroke
- 5.197x6.496inches / 132x 165mm
- Emissions
- Tier III
- Power
- 530hp / 395.2kW
- Air cleaner
- aspirator and dual paper elemnts
- Compression
- 16.0:1
- Rated RPM
- 2100
- Starter volts
- 12
- Coolant capacity
- 70qts / 66.2L
ENGINE OIL
- Oil capacity
- 63.4qts / 60.0L
JOHN DEERE 9630 ENGINE
- Description
- John Deere 13.5L 6-cyl diesel
TRANSMISSION
- Transmission
- John Deere PowerShift
- Type
- full power shift
- Gears
- 18 forward and 6 reverse
- Clutch
- electronic wet disc
SPEEDS
- Description
- With Group 48 tires
MECHANICAL
- Chassis
- 4x4 articulated 4WD
- Differential lock
- hydraulic differential lock standard
- Steering
- hydrostatic power
- Brakes
- hydraulic wet discs
- Trailer brakes
- hydraulic optional
- Cab
- CommandView Cab standard with air-conditioning. Optional automatic climate control and leather trim
- Transmission
- 18-speed full power shift
CAPACITY
- Fuel
- 350gal / 1324.8L
- Hydraulic system
- 27gal / 102.2L 28gal / 106.0L (3-point) 20gal / 75.7L (high-flow) 31gal / 117.3L (high-flow and 3-point)
HYDRAULICS
- Type
- closed-center pressure and flow compensating
- Capacity
- 27gal / 102.2L 28gal / 106.0L (3-point) 20gal / 75.7L (high-flow) 31gal / 117.3L (high-flow and 3-point)
- Pressure
- 2900psi / 200.0bar
- Valves
- 4 to 6
- SCV flow
- 30gpm / 113.6lpm
- Total flow
- 48gpm / 181.7lpm 78gpm / 295.2lpm (High-Flow)
TRACTOR HITCH
- Rear Type
- 4N/3/4N/4
- Rear lift (at 24
- 15,300lbs / 6940kg
- Drawbar
- Catergory 5 standard with secondary chain support
DIMENSIONS
- Wheelbase
- 137.8inches / 350cm
- Length
- 270inches / 685cm 285inches / 723cm (with 3-point)
- Width
- 118.6inches / 301cm
- Hinge pin Ground clearance
- 20.5inches / 52cm
- Clearance (rear axle)
- 30.8inches / 78cm
- Rear axle
- 4.724 by 120inches / 119by 3048mm
JOHN DEERE 9630 WEIGHT
- Shipping
- 37747lbs / 17122kg
- Operating
- 39465lbs / 17901kg *Weight with 480/80R46 triples
- Ballasted
- 54165lbs / 24569kg
JOHN DEERE 9630 HEIGHT
- Hood
- 107inches / 271cm
- Cab
- 142inches / 360cm
- Exhaust
- 156inches / 396cm
DIMENSIONS & TIRES
- Wheelbase
- 137.8inches / 350cm
- Weight
- 37747 to 39465 pounds
9630 SERIAL NUMBERS
- Location
- Rear-left of tractor hinge frame on early models. Right side of tractor frame, ahead of front axle, on late models
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 200
- Batteries
- 3
- Battery CCA
- 925
- Battery volts
- 12
About John Deere Tractor
The John Deere 9630 tractor is part of the 9030 Series of tractors. The 9630 is classified as a Four-wheel Drive 4WD Tractors and that is often used for Agriculture Tractors operations. The engine of the 9630 tractors is impressive. This setup improves usability in the real world scenario.
