John Deere 8R 410 Tractor (2021)

Manufacturer:John Deere

Price:492,755(USD)

Series:8R Series

Model:8R 410

Equipment Type: Row-Crop Tractors

Factory:Waterloo, Iowa, USA

Full Specifications

KEY SPECS

Engine description: John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)

KEY SPECS

Engine displacement: 9 L549 cu in.
Rated engine power: ECE-R120: 302 kW410 hp
Maximum engine power: ECE-R120: 326 kW443 hp
Rated PTO power (hp SAE): 231 kW310 hp
Transmission type: Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h (24.9 mph)Optional: e23 PowerShift with Efficiency Manager 50K, 50 km/h (31 mph)"
Hydraulic pump rated output: Standard: 85-cc pump: 227.1 L/min60 gpmOptional: 85-cc plus 35-cc dual pump: 318 L/min84 gpm
Rear hitch category (SAE designation): Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg20,000 lbOptional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg15,000 lb"
Base machine weight: ILS™/e23: 12,700 kg28,000 lb"

ENGINE SPECIFICATIONS

Description: John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
Engine type: Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head"
Engine family: MJDXL09.0333
Rated speed: 2100 rpm
Aspiration: Dual turbochargers, variable geometry turbo with fixed geometry turbo in series; air-to-air aftercooling and cooled exhaust gas recirculation"
Cylinders liners: Wet-sleeve
Emission level: Final Tier 4
After treatment type: Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Displacement: 9 L549 cu in.

ENGINE PERFORMANCE

Rated power: ECE-R120: 302 kW410 hp
Rated PTO power (hp SAE): 231 kW310 hp
Power boost: 8 percent
Maximum engine power: ECE-R120: 326 kW443 hp
Engine peak torque: At 1600 rpm: 1851 Nm1365 lb-ft
PTO torque rise: 40 percent

TRANSMISSION

Type: Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h24.9 mphOptional: e23 PowerShift with Efficiency Manager 50K, 50 km/h31 mph"

HYDRAULIC SYSTEM

Type: Closed-center, pressure/flow compensated system with load sensing"
Pump rated output: Standard: 85-cc pump: 227.1 L/min60 gpmOptional: 85-cc plus 35-cc dual pump: 318 L/min84 gpm
Available flow at a single rear SCV: 1.3-cm (1/2-in.) couplers: 132 L/min35 gpm1.9-cm (3/4-in.) coupler: 159 L/min42 gpm
Available flow at front SCVs: 96 L/min25 gpm
Number of rear selective control valves (SCVs: Standard: 1.3-cm (1/2-in.) ISO couplers: 4Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available1.9-cm (3/4-in.) ISO coupler: 1
SCV control: Electronic

REAR HITCH

Hitch category (SAE designation): Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg20,000 lbOptional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg15,000 lb"
Maximum lift capacity behind lift points: Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg26,729 lb"
Sensing type: Electrohydraulic
Rear axle differential lock: Electrohydraulic

DRAWBAR

Drawbar category: Standard: Category 4Optional: Category 4 with heavy-duty support
Maximum vertical load: Dependent on drawbar position: 1837 to 2700 kg4050 to 6000 lbOptional: 2,245 kg4,950 lb4,990 kg11,000 lb"

REAR POWER TAKE-OFF (PTO)

Type: IndependentStandard: 44 mm (1.75 in.) 20-spline, 1,000 rpmOptional: 44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm"
Engine rpm (at rated PTO speeds): e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm"
Multispeed PTO option availability: Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable"
PTO actuation: Electrohydraulic with adjustable modulation

FRONT HITCH

Category: Category 3N
Standard lift capacity: Category 3N ground-engaging front hitch: 5200 kg11,464 lb"
Front power take-off (PTO): 44 mm (1.75 in.) 20 spline, 1000 rpm35 mm (1.375 in.) 21 spline, 1000 rpm35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)"
PTO speed: 1,000 PTO rpm at 2000 engine rpm"

REAR AXLE

Type: Standard: Rack-and-pinion, double flat, or flange axlesOptional: short, double flat axle with single taper hub: Diameter: 120 x 2550 mm4.72 x 100.4 in.Long, double flat axle with single taper hub: Diameter: 120 x 3010 mm4.72 x 118.5 in."
Final drive type: Inboard planetary three pinion
Rear differential lock: Full-locking electrohydraulic

FRONT AXLE

Type: Standard: ILSOptional: 1500 Series MFWD
Front axle differential lock: 1500 Series MFWD: Full-locking electrohydraulicILS: Full-locking electrohydraulic

TIRES

Wheel tread range: 1500 Series MFWD: 1524-3657 mm60-144 in.ILS: 1524-3657 mm
Turning radius without brakes: ILS with 380/80R38 group 43 tires at 152.4-cm (60-in.) spacing: 5.77 m18.9 ftILS with 600/70R30 group 43 tires at 187-cm (74-in.) spacing: 6.14 m20.1 ft
Central Tire Inflation System (CTIS): Optional

STEERING

Type: Standard: Hydraulic power-steering with electric pump back-upOptional: ActiveCommand Steering 2 (ACS™ 2) with electronic backup pump

ELECTRICAL SYSTEM

Alternator size: Standard: 200 ampOptional: 330 amp
Battery options: 12 V
Working lights: Standard: 18 halogenAvailable: 18 LED22 LED
Type of bulb in headlight (Halogen, Zenon, LE: Standard: halogen, 65 WAvailable: LED"
Total cold cranking amps: 1,850 CCA"

OPERATOR STATION

Seat: Degree of seat swivel, left hand25 degree (angle)Degree of seat swivel, right hand40 degree (angle)Standard: air suspensionOptional: ActiveSeat™ II"
Cab suspension: Optional
Instructional seat: Standard
Display: Standard: 4600 Generation 4 CommandCenter™: 25.4 cm10 in.
Radio: Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna"
Inner cab volume: 3.24 m3114 cu ft
Cab glass area: 6.52 m270.18 sq ft

DIMENSIONS

Wheelbase: MFWD: 3,080 mm121.3 in.ILS: 3,050 mm120.1 in."
Overall length: 6,636 mm261.3 in."
Drawbar clearance: 376 mm14.8 in.
Front axle center: MFWD: 686 mm27 in.ILS: 590 mm23.2 in.

WEIGHT

Base machine weight: ILS™/e23: 12,700 kg28,000 lb"
Maximum ballast level: 20,000 kg44,100 lb"
Maximum permissible weight: 20,000 kg44,100 lb"

CAPACITIES

Crankcase oil volume: 1500 MFWD: 27.6 L7.3 U.S. gal.ILS: 25.8 L6.8 U.S. gal.
Fuel tank: 727 L192 U.S. gal.CTIS: 651 L172 U.S. gal.
Diesel exhaust fluid (DEF) tank: 37.2 L9.8 U.S. gal.
Cooling system: 42.3 L11.2 U.S. gal.
Transmission-hydraulic system: 1500 MFWD: 184.6 L48.8 U.S. gal.ILS: 207.2 L54.7 U.S. gal.

SERVICEABILITY

Interval for engine oil change: 500 hours
Interval for hydraulic/transmission oil chang: 1,500 hours"
Interval for engine coolant change: 6,000 hours"

LOADERS

Loader: H480
Lift capacity at full height: 2,486 kg5469 lbmeasured at 800 mm (31.5 in.) ahead of pivot"
Maximum lift height: 4735 mm186 in.
Guidance: Integrated AutoTrac™
Telematic: JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)"
Remote diagnostics: JDLink hardware standard

ADDITIONAL INFORMATION

Date collected: 22-Jan-21

About John Deere Tractor

The 8R 410 tractor is part of the John Deere's 8R Series. The 8R 410 is a Row-Crop Tractors type, which is used most often in Agriculture Tractors. The 310 horsepower engine of the 8R 410 tractors is impressive. This arrangement improves usability in the real world scenario.